Water appeared in two or more separate places
From the source check, that means multiple breaches or one breach feeding several paths.
Source of the water
Louisiana
Our water-damage technicians extracts stormwater, removes debris and contaminated materials, and dries the building after rain-driven or surface flooding.
Signs to look for
As moisture readings guide drying, if you notice any of these problems, call us before water has more time to spread into nearby materials.
From the source check, that means multiple breaches or one breach feeding several paths.
Through the final dry check, wind driven rain enters an opening at volume, not a trickle.
As moisture readings guide drying, wind lifts shingles and rain follows the same direction it came from.
From the source check, torn cladding gives sideways rain a direct path into the wall assembly.
As moisture readings guide drying, vents are designed for air, not for horizontal water.
To control the wet boundary, that is water at grade rather than rain from above, and it is a different peril on your policy.
What happens
Our water-damage technicians adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
As moisture readings guide drying, power to the affected area goes off before anyone enters.
Through the final dry check, we walk every elevation and the roof line and list each opening: roof breach, broken window, torn siding, failed soffit, gable vent, garage door.
As moisture readings guide drying, openings get covered and sealed so the next band of weather does not add a second loss.
From the source check, rain that entered through a wind created opening and water that rose at grade are documented as different events.
To control the wet boundary, submersible pumps move the bulk from a flooded level and a truck mounted extractor pulls water from carpet and hard floors.
Through the final dry check, sideways rain loads assemblies that look untouched from the room. From the source check, we read them with a moisture meter and open what holds water.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
From the source check, here is how we usually handle storm water removal near Louisiana.
As moisture readings guide drying, roof, window, wall, door or up from the ground, and whether it is still coming in.
Your callAs moisture readings guide drying, stay out of standing water and away from downed limbs and wires.
+10 minutesTo control the wet boundary, board up stock, tarp, submersible pumps and extraction gear travel on the same truck.
+15 minutesAs moisture readings guide drying, power is confirmed off, hazards are marked, and we walk the building to list every opening.
On arrivalTo control the wet boundary, openings are boarded or tarped so the next band of rain stays outside.
First hour on siteTo control the wet boundary, pumping and extraction run alongside removal of storm debris and sediment.
First hours on siteThrough the final dry check, padding, saturated insulation and swollen composite cabinet and vanity bases come out, photographed on the way to the container.
Same day or nextUnderstanding the cost
As moisture readings guide drying, we explain the recommended work and price before you approve the job. As moisture readings guide drying, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Emergency board up, per window or door opening | As moisture readings guide drying, national estimate per opening, materials and labor, on the first visit. | $75 to $250 |
| Emergency board up and tarping to close a damaged building envelope | To control the wet boundary, national estimate for several openings plus a roof tarp. From the source check, height and pitch drive the spread. | $500 to $2,500 |
| Basement storm water pump out and extraction, water only | As moisture readings guide drying, national estimate for removal without demolition, same band as any outdoor water pump out. | $600 to $2,500 |
| Storm water removal and drying, one level, rain through a breach | To control the wet boundary, national estimate for clean rain in ceilings, walls and flooring with three to five drying days. | $2,500 to $8,000 |
| Storm flooding at grade, one level with a flood cut and disposal | To control the wet boundary, national estimate including removal, cleaning, disinfection, disposal and drying. | $4,000 to $12,000 |
| Storm water cleanup priced by affected area, water that came from outside | Through the final dry check, national estimate covering removal, cleaning, disinfection and drying. | $7 to $15 per square foot |
| Storm debris removal and disposal, per container load | To control the wet boundary, national estimate per container of storm debris, soaked material and unsalvageable contents. | $400 to $900 |
| After hours or overnight dispatch charge | As moisture readings guide drying, national estimate for nights, weekends and holidays, billed once rather than per hour. | $100 to $400 nationally |
How many openings have to be closed
To control the wet boundary, board up is priced per opening and tarping by roof area and pitch.
Where the water came from
To control the wet boundary, clean rain through a breach is a straightforward drying job.
Depth and area affected
Through the final dry check, a wet room on the wind side is a different job from a lower level with a foot of water.
How many assemblies are wet
To control the wet boundary, storms often wet ceilings, walls and floors in the same room.
Finished or unfinished space
To control the wet boundary, bare block and slab clean up quickly.
Storm debris and disposal volume
To control the wet boundary, yard debris, blown material and soaked contents go out as waste.
Why timing matters
To control the wet boundary, water can keep moving into nearby materials even when the surface looks dry.
To control the wet boundary, storms travel in lines and the second cell often arrives within hours.
As moisture readings guide drying, people close the obvious hole and miss the gable vent or the torn soffit.
As moisture readings guide drying, limbs and blown material hold water and add weight to an already damaged deck.
As moisture readings guide drying, rain in a ceiling is clean water.
Helpful service information
From the source check, start with the short explanation. To control the wet boundary, open a card if you want a little more detail.
To control the wet boundary, the first is wind driven rain, which is rain moving sideways fast enough to defeat details built for water falling down.
Through the final dry check, storms get water inside two completely different ways, and telling them apart is the whole job.
From the source check, board up covers broken glass and forced openings so the next band of rain stays outside.
As moisture readings guide drying, closing the building envelope is the part of storm work that saves the most money, and it has to happen first.
Through the final dry check, a storm that wets flooring only is a light load.
As moisture readings guide drying, the drying plan changes with how many assemblies got wet. Through the final dry check, a storm that wets flooring only is a light load.
Help near you
Choose your area below, or call (877) 734-0262 and describe what happened.
You may also need
Our water-damage technicians provides urgent floodwater extraction, debris removal, moisture source check, and drying when fast action is needed.
Get a Quote: (877) 734-0262Our water-damage technicians extracts floodwater and checks contamination, hidden moisture, and affected materials before cleaning and structural drying begin.
Get a Quote: (877) 734-0262Our water-damage technicians finds the affected area below a roof leak and dries ceilings, walls, insulation, flooring, and hidden cavities.
Get a Quote: (877) 734-0262Our water-damage technicians removes stormwater, debris, and contaminated materials after hurricane flooding, followed by cleaning, moisture control, and structural drying.
Get a Quote: (877) 734-0262Our water-damage technicians removes flash-flood water, mud, and debris, then cleans and dries affected areas exposed to outdoor contamination.
Get a Quote: (877) 734-0262Our water-damage technicians pumps out basement water, removes contaminated debris, and dries floors, walls, framing, and contents below grade.
Get a Quote: (877) 734-0262Our water-damage technicians pumps out water after sump-pump failure, cleans the affected area, and dries basement or crawl-space materials.
Get a Quote: (877) 734-0262Our water-damage technicians removes water, debris, and damaged materials, then cleans and dries the property after indoor or outdoor flooding.
Get a Quote: (877) 734-0262Common questions
From the source check, nationally, one level with rain through a breach usually runs about $2,500 to $8,000.
To control the wet boundary, it depends on how the water got in. As moisture readings guide drying, rain entering through an opening the wind made is normally covered by your homeowners policy.
From the source check, wind damage is the broken opening and the rain that came through it. Through the final dry check, flood damage is water that arrived at grade level from outside.
To control the wet boundary, we do emergency board up and tarping as part of the water job, because leaving the building open costs you a second loss.
To control the wet boundary, we walk every elevation and the roof line and list each opening before drying starts.
Through the final dry check, it depends on the path it took. As moisture readings guide drying, rain that came straight through a roof or window is clean water at first.
From the source check, you can handle a small amount of clean rain on a hard floor. From the source check, a shop vacuum handles about an inch and no more.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our water-damage technicians trace homes, businesses, and managed properties throughout Louisiana and nearby communities.
View the area on Google Maps